Create a professional, neat and fully integrated line of LED lighting with this recessed aluminium LED profile. Designed for installation within suitable walls, ceilings, furniture and joinery, the profile provides a clean and modern housing for compatible LED strip lighting.

Each profile is supplied in a 2 metre length with a milky diffuser and end caps. The diffuser helps soften the light output and improve the appearance of the illuminated line, while the aluminium body provides a durable and tidy finish.

With external dimensions of approximately 52.1mm wide × 13.3mm high, this recessed aluminium profile is suitable for a wide range of indoor LED lighting applications. The elegant silver finish makes it ideal for both residential and commercial projects.

Available in total lengths from 2 metres to 100 metres, this profile is suitable for domestic installations, property developments, retail fit-outs and larger commercial lighting projects.

A plaster-in LED profile is designed to become part of the finished wall or ceiling rather than remaining visibly surface-mounted. The perforated wings are fixed to the plasterboard or prepared surface and then covered with suitable jointing compound or plaster.

After finishing and decoration, the aluminium wings are concealed and the visible result is a crisp, continuous line of light. The aluminium channel also supports the LED tape and helps transfer heat away from the strip.

Complete your installation with compatible V-TAC LED strip lights. This recessed aluminium LED profile is designed for use with suitable LED tape and milky diffuser lighting setups for a clean and professional finish. As the internal channel width is not specified in the product datasheet, the dimensions of the LED strip, connectors and soldered joints should always be checked before installation.

Please note: LED strip, LED driver, controller, cable and electrical accessories are not included unless specifically stated in the selected product option.

• Ceiling perimeter lighting: concealed lighting and shadow-gap effects.
• Recessed ceiling lighting: continuous linear lighting across plasterboard ceilings.
• Wall feature lighting: suitable for hallways, bedrooms and living rooms.
• Kitchen lighting: above worktops, islands, cabinets and feature areas.
• Bathroom accent lighting: when used with suitably rated LED tape and drivers.
• Staircase lighting: along walls, ceilings or beneath handrails.
• Retail lighting: integrated lighting for displays, shelves, counters and shop interiors.

All options are supplied as individual 2 metre profile lengths.

Longer options are supplied as separate 2 metre lengths and are not supplied as one continuous piece.

1. Plan and mark the lighting position, cable route and profile alignment.
2. Prepare the required opening or installation area in the plasterboard wall or ceiling.
3. Cut the aluminium profile and diffuser to the required length using suitable tools.
4. Secure the perforated wings to the plasterboard or supporting structure.
5. Apply suitable jointing compound or plaster across the wings.
6. Allow the surface to dry, then sand and decorate.
7. Clean the internal aluminium channel before installing the LED tape.
8. Connect the LED tape to a compatible driver and controller where required.
9. Test the lighting before completing the installation.
10. Fit the diffuser and end caps after testing.

Important: Check all dimensions, LED tape widths and cable routes before cutting or plastering. Protect the internal channel from plaster, dust and decorating materials during installation.

Planning a plaster-in lighting installation, commercial fit-out or bulk order? Our team can help with aluminium profiles, COB LED tape, drivers, controllers and connection accessories.