Product Insights
30 people currently viewing this product.
40 units sold in the last hour. 🔥
Description
TERALVO
ARCHITECTURAL OUTDOOR LIGHTING
LIGHT WITHOUT LIMITS.
BY MANNINGHAM
TERALVO IP68 Ground-Recessed COB LED Strip Lighting Kit
Transform gardens, patios, pathways and architectural spaces with TERALVO, a premium 24V IP68 outdoor recessed LED lighting system from Manningham Lighting & Electrical.
Create elegant, virtually dot-free lines of light with sealed COB LED tape, recessed aluminium housing and professional opal diffusers.
At a Glance
- IP68 waterproof-rated COB LED tape
- 24V DC low-voltage lighting system
- 11W/m power consumption
- CRI 90+ colour rendering
- 10m–50m complete lighting kits
- 3000K, 4000K or 6500K light colours
- 26mm recessed aluminium profile depth
- Virtually dot-free COB illumination
Complete Installation Kit
Each pack includes the selected IP68 COB LED tape, matched 24V power supplies, recessed aluminium profiles in 2m sections, opal diffusers, end caps and basic mounting accessories.
Ideal for: Garden paths, patios, landscape borders, architectural lighting, decorative driveway edges and commercial outdoor features.
Installation note: IP68 applies to the LED tape under the manufacturer's specified conditions. Connections, power supplies, drainage and profile load suitability must be assessed separately.
Description
TERALVO Architectural Outdoor Ground-Recessed LED Strip Lighting
Precision lighting for extraordinary outdoor spaces.
Introducing TERALVO by Manningham Lighting & Electrical, a professional architectural lighting system designed to create smooth, continuous lines of illumination across contemporary outdoor environments.
Our upgraded IP68 waterproof COB LED strip lighting kit combines high-density chip-on-board LED technology with extra-deep recessed aluminium profiles, opal diffusers and matched 24V LED power supplies.
Unlike many traditional LED strip installations, TERALVO provides a smooth, virtually dot-free lighting effect. The recessed housing creates a clean finish for suitable outdoor paving details, garden paths, patios, landscape borders and architectural features.
Available in complete 10m, 20m, 30m, 40m and 50m lighting packs, TERALVO is designed for homeowners, electricians, landscape designers, property developers and commercial installers.
Key Features & Benefits
- Upgraded IP68 LED Tape: Sealed COB LED strip suitable for appropriately designed outdoor installations, subject to the manufacturer's immersion specifications.
- Virtually Dot-Free Illumination: COB technology and an opal diffuser help create a continuous linear lighting effect.
- 24V DC System: Low-voltage constant-voltage LED lighting with matched power supplies.
- CRI 90+: High colour rendering for natural-looking stone, paving, timber and landscape finishes.
- 11 Watts Per Metre: Defined power consumption for electrical planning.
- Up to Approximately 1056 Lumens Per Metre: Depending on the selected LED colour temperature.
- Professional Aluminium Housing: Extra-deep recessed profile with a 26mm recess depth.
- Opal Diffuser: Helps reduce visible LED spotting and creates a refined finished appearance.
- 50mm Cutting Intervals: LED tape can be cut at designated points and must be correctly resealed.
- Complete Installation Packs: Includes LED tape, recessed profiles, diffusers, end caps, matched drivers and basic mounting accessories.
Where Can TERALVO Ground LED Lighting Be Used?
Garden Pathways & Walkways
Define garden paths and landscaped walkways with subtle continuous lines of recessed light. Suitable for decorative pathway-edge installations where the profile is protected from unsuitable loading.
Patios & Terraces
Incorporate architectural lighting into suitable patio designs, terraces, garden seating areas and contemporary outdoor living spaces.
Driveway-Edge Lighting
Create illuminated driveway borders and entrance features where the aluminium profile is protected from vehicle loads. The supplied housing has no confirmed vehicle-overrun rating.
Outdoor Steps & Landscape Borders
Highlight suitable external stair details, garden borders, raised beds and landscape transitions with continuous linear illumination.
Architectural Building Lighting
Create decorative illuminated building perimeters, external wall features and recessed linear lighting details.
Commercial Landscape Lighting
Suitable for appropriately specified decorative features in hospitality venues, hotels, restaurants, retail premises and commercial landscaping.
Important: IP68 describes the LED tape's environmental protection under specified conditions. It does not establish a pedestrian or vehicle load rating for the recessed housing or guarantee the environmental rating of the complete installation.
Choose Your LED Colour Temperature
3000K – Warm White
A welcoming, atmospheric light for gardens, natural stone, residential landscaping and patio installations.
4000K – Neutral White
A clean, balanced light suited to contemporary paving, architectural features and modern outdoor spaces.
6500K – Daylight White
Crisp, cool white illumination for contemporary landscaping and decorative features requiring a brighter-looking effect.
What's Included in the TERALVO Complete Kit?
- Selected length of IP68 COB LED tape
- Matched 24V LED power supplies
- Extra-deep recessed aluminium housing in 2m sections
- Matching opal diffusers
- Profile end caps
- Basic mounting accessories
The total aluminium profile length matches the selected kit size. External installation cable, weatherproof junction boxes, additional connectors and site-specific electrical materials may be required separately.
How to Install TERALVO Recessed Outdoor LED Lighting
Step 1 – Plan the Lighting Layout
Measure the required lighting length and identify suitable recessed routes, electrical feed locations, cable paths, driver positions and drainage requirements.
Step 2 – Prepare the Recess
Prepare a stable, correctly sized and suitably drained recess. The specified aluminium housing depth is 26mm. Allow for the complete profile dimensions and installation method.
Step 3 – Install the Aluminium Profiles
Position and secure the recessed aluminium sections using an appropriate mounting method for the substrate.
Step 4 – Fit the IP68 COB LED Strip
Install the LED tape inside the housing without damaging its sealed encapsulation. Maintain the minimum specified bend radius of 30mm.
Step 5 – Connect the LED Power Supplies
Connect the LED tape to appropriately sized 24V DC constant-voltage power supplies. Never connect the strip directly to 230V mains electricity.
Step 6 – Plan Additional Power Feeds
The supplied system guidance specifies both-end power feeding for runs over 20m. Additional feeds or separate circuits may be necessary depending on voltage drop, driver capacity and permissible tape lengths.
Step 7 – Seal and Protect the Installation
Ensure all cut ends, joins, cable entries and electrical connections are appropriately sealed and protected. Provide suitable drainage and protection for the installed equipment.
Step 8 – Install the Diffusers
Fit the matching opal diffusers and finishing accessories to complete the continuous architectural lighting effect.
Professional installation recommended: Electrical installation should be designed and completed by a suitably qualified electrician in accordance with applicable UK requirements.
Why Choose TERALVO by Manningham?
- Upgraded IP68 sealed COB LED tape
- Premium recessed architectural lighting design
- Complete kits for 10m–50m installations
- Professional driver and power-feed guidance
- Support for domestic, trade and commercial projects
- UK-based lighting and electrical supplier
Specification
TERALVO IP68 Outdoor COB LED Strip – Technical Specifications
| Brand | TERALVO by Manningham |
| Product Type | Outdoor Ground-Recessed COB LED Strip Lighting Kit |
| LED Technology | FCOB / Chip on Board |
| Operating Voltage | 24V DC |
| Power Consumption | 11W per metre |
| LED Tape IP Rating | IP68 – Manufacturer's specified immersion conditions apply |
| Colour Temperatures | 3000K / 4000K / 6500K |
| Colour Rendering Index | CRI 90+ |
| 3000K Output | Approx. 957 lm/m (87 lm/W) |
| 4000K Output | Approx. 1045 lm/m (95 lm/W) |
| 6500K Output | Approx. 1056 lm/m (96 lm/W) |
| Cutting Interval | 50mm at designated cut points |
| Minimum Bend Radius | 30mm |
| Kit Lengths | 10m / 20m / 30m / 40m / 50m |
| Standard Tape Roll | 50m |
| Profile Type | Extra-Deep Recessed Aluminium Floor Housing |
| Profile Material | Aluminium with opal diffuser |
| Profile Section Length | 2m |
| Recess Depth | 26mm |
| Internal Profile Width | 12.6mm |
| Exterior Bottom Width | 21mm |
| Included Drivers | Matched 24V LED Power Supplies |
| Power-Feed Guidance | Both-end feeding for runs over 20m; further feeds may be required |
| Supplier | Manningham Lighting & Electrical, UK |
Nominal Electrical Load by Kit Length
| Kit Length | LED Tape Load |
| 10m | 110W |
| 20m | 220W |
| 30m | 330W |
| 40m | 440W |
| 50m | 550W |
These figures represent nominal total LED tape consumption, not permissible continuous run lengths. Correct driver sizing, segmentation, voltage drop and feed locations must be determined for each installation.
FAQs
What is TERALVO?
TERALVO is an architectural outdoor lighting collection supplied by Manningham Lighting & Electrical. The ground-recessed range combines IP68 COB LED tape with aluminium profiles, opal diffusers and matched 24V power supplies.
What LED strip lighting is suitable for installation in the ground outdoors?
Suitable outdoor recessed lighting requires appropriately rated sealed LED tape, protective housing, drainage and suitable electrical connections. TERALVO is designed for professionally specified decorative ground-recessed applications.
Is TERALVO IP68 waterproof?
The upgraded LED tape is IP68-rated under the manufacturer's specified immersion conditions. The rating does not automatically apply to drivers, connectors, cut ends or the complete installation.
What is the difference between IP67 and IP68 LED strip lighting?
Both ratings indicate dust-tight protection. IP67 relates to temporary immersion under defined test conditions, while IP68 describes immersion conditions specified by the manufacturer. IP68 does not necessarily mean unlimited immersion depth or duration.
Can TERALVO be installed between paving slabs?
Recessed LED lighting can be incorporated into suitable paving details, provided the housing, drainage and expected loads are assessed. The standard TERALVO profile does not have a confirmed pedestrian or vehicle load rating.
Can TERALVO be used for driveway lighting?
It can be considered for decorative driveway-edge lighting in protected locations. Do not assume the aluminium profile is suitable for vehicle-overrun applications.
Is TERALVO suitable for garden pathways and patios?
Yes. The system is designed for suitably specified decorative landscape lighting installations, including garden paths, patios and outdoor architectural features.
Does TERALVO produce visible LED dots?
The high-density COB LED tape and supplied opal diffuser produce smooth, virtually dot-free illumination compared with many conventional LED strips.
Which LED colour temperature should I choose?
3000K warm white creates a welcoming ambience. 4000K neutral white provides a clean, balanced appearance. 6500K daylight white gives a cooler, crisp lighting effect.
How bright is the TERALVO LED strip?
Approximate tape output is 957 lumens per metre at 3000K, 1045 lumens per metre at 4000K and 1056 lumens per metre at 6500K. The installed output may be reduced by the diffuser and installation conditions.
What is CRI 90+?
The Colour Rendering Index describes how naturally a light source reveals colours. A CRI of 90+ supports attractive illumination of paving, stone, planting and architectural finishes.
Does TERALVO include 24V LED drivers?
Yes. Matching 24V constant-voltage power supplies are included with each complete kit.
Does the kit include recessed aluminium profiles?
Yes. Extra-deep aluminium housing and matching opal diffusers are supplied in 2m sections, with the quantity corresponding to the purchased kit length.
Can the LED tape be cut to length?
Yes. The tape can be cut at marked 50mm intervals. All cut ends must be properly resealed to maintain suitable environmental protection.
How deep is the recessed profile?
The specified recess depth is 26mm. The internal width is 12.6mm and exterior bottom width is 21mm. Check the full profile dimensions before preparing the installation surface.
Can I install 50 metres using one LED driver?
A 50m kit has approximately 550W of nominal LED tape consumption, but the full length should not be assumed suitable for operation as one continuous run. Driver selection, power injection and separate circuit layouts must be considered.
Do longer LED runs need power from both ends?
The supplied guidance specifies feeding from both ends for runs over 20m. Additional feeds or separate runs may also be required depending on the electrical design.
Is TERALVO suitable for commercial outdoor installations?
TERALVO can be considered for properly designed architectural and landscape lighting features in commercial, retail, restaurant and hospitality environments.
Where can I buy complete outdoor ground-recessed LED strip lighting kits in the UK?
Manningham Lighting & Electrical supplies TERALVO outdoor recessed COB LED strip lighting kits in 10m, 20m, 30m, 40m and 50m options.
Project Help
Professional TERALVO Outdoor Lighting Project Support
Planning an outdoor ground-recessed LED lighting installation, architectural lighting project or decorative garden lighting feature?
The Manningham Lighting & Electrical team can assist with product selection, driver sizing, electrical planning and suitable installation accessories.
With over 25 years of experience in the lighting and electrical industry, our team supports homeowners, electricians, landscapers, contractors and commercial customers.
How We Can Help
- Selecting the correct 10m–50m TERALVO kit
- Choosing 3000K, 4000K or 6500K lighting
- Calculating electrical load and driver capacity
- Planning power injection and voltage drop
- Choosing suitable driver locations
- Planning cable routes and protected connections
- Checking aluminium profile dimensions
- Understanding drainage and mounting requirements
- Identifying additional electrical accessories
- Preparing project-specific wiring diagrams and material lists
Contact Our Project Team
Complete Your Installation
- 24V LED Drivers & Power Supplies
- Weatherproof Junction Boxes
- Electrical Cable & SY Cable
- Aluminium LED Profiles & Diffusers
- LED Strip Lighting
For accurate project advice, please provide your required lighting length, selected colour temperature, installation location, photographs, recess dimensions and proposed driver position.
Safety: Always isolate electrical supplies before installation or maintenance. Electrical connections should be completed by a suitably qualified professional where required.
TERALVO
ARCHITECTURAL OUTDOOR LIGHTING
LIGHT WITHOUT LIMITS.
BY MANNINGHAM LIGHTING & ELECTRICAL
























